13
TH-103VX200W
6.1.4. SD mode
Select the SD mode by Up/Down button on the remote control at the front page of CAT mode and then press the OK button on the
remote control.
To exit the SD mode, press the RETURN button on the remote control.
6.1.5. MS mode
Select the MS mode by Up/Down button on the remote control at the front page of CAT mode and then press the [5] button on the
remote control more than 3 seconds.
To exit the MS mode, press the RETURN button on the remote control.
Caution:
Market Select should be set after exchange of A-Board.
Destination number
Default setting
Number Destination Number Destination
0 Japan 16 --
1 North America 17 --
2 Europe 18 China
3 Others 19 China (Hotel)
4Britain20Russia
5 Taiwan 21 Russia (Hotel)
6 Thailand 22 Hong Kong
7--23--
8 Japan (Hotel) 24 --
9 North America (Hotel) 25 --
10 Europe (Hotel) 26 --
11 -- 27 --
12 Britain (Hotel) 28 Middle East/Hong Kong
13 -- 29 Middle East/Hong Kong (Hotel)
14 Thailand (Hotel) 30 Australia
15 -- 31 Australia (Hotel)
Number Destination
1 North America
To Next Page
Loading...
