42
Options Adjustments
3D Settings
Screensaver
Signal
Extended life settings
Input label
Off
PC Power management
Off
Auto power off
Off
OSD Language
English
(
UK
)
Power save
Setup
Item Adjustments
Onscreen display
On: Displays all the following on screen.
• Power on display
• Input signal switch display
• No signal display
• Mute and the remaining time of off-timer after
was pressed.
Off: Hides all the items above from view.
Initial input
Adjusts the input signal when the unit is turned on.
Off
HDMI HDMI2 SLOT INPUT* 4K-SDI 4K-DVI PC
* “SLOT INPUT” is displayed when an optional Terminal Board is installed.
Notes:
• Only the adjusted signal is displayed. (see page 15)
• This menu is available only when “Input lock” is “Off”.
Input lock
Locks the input switch operation.
Off
HDMI HDMI2 SLOT INPUT* 4K-SDI 4K-DVI PC
* “SLOT INPUT” is displayed when an optional Terminal Board is installed.
Notes:
• Only the adjusted signal is displayed (see page 15).
• Input switch can be used when this is set to “Off”.
1
Press to display the Setup menu.
2
Press to select “OSD Language”.
Press for more than 3 seconds.
Options
On
Onscreen display
Off
Initial input
Off
Input lock
Off
Button lock
Off
Remocon User level
Enable
Off-timer function
Mode1
Aspect Mode
Manual
Auto Setup
Off
Studio mode
3D settings
Function button assign 1
Scrolling bar
Function button assign 2
Test patterns
Function button assign 3
Blue only
Function button assign 4
On
3D Safety Precautions
V-Position
H-Position
0
0
5
Press to exit from Options menu.
4
3
Press to select “Options”.
Press to display the Options menu.
Press to select your preferred menu.
Press to adjust the menu.
Options
Shipping
To Next Page
Loading...
