7.7. Lead of Wiring (7)
TH-37PV500E/B
PUT THE CLAMPER #29 TO THE TUNER UNIT AS IF ILLUSTRATED IN FIG.1.
MAKE WIRE DRESSING AS IF ILLUSTRATED BELOW.
NOTES:
1. CONNECT CONNECTORS SURELY.
2. KEEP MODERATE SLACK IN WIRES NOT TO GIVE ANY STRESS TO CONNECTORS.
3. PLACE SAG OF PB5 AND PB30 WIRES AROUND EACH CONNECTOR OF THEM.
4. MANAGE THE WIRES THAT ARE AROUND THE ELECTRIC FAN ASSEMBLIES NOT TO TOUCH A BLADE OF
ELECTRIC FAN NOR EDGE OF A FAN MOUNT METAL.
5. PASS THE SS11 WIRE AND THE SS12 WIRE BETWEEN A M8 BOSS AND P-PCB, AND MANAGE THEM TO KEEP
AWAY FROM A M8 BOSS.
28
TH-42PV500E / TH-42PV500B / TH-37PV500E / TH-37PV500B
To Next Page
Loading...
