7.8. Lead of Wiring (8)
TH-42PV500E/B
MAKE WIRE DRESSING AS IF ILLUSTRATED BELOW.
NOTES:
1. CONNECT CONNECTORS SURELY.
2. KEEP MODERATE SLACK IN WIRES NOT TO GIVE ANY STRESS TO CONNECTORS.
3. PLACE SAG OF PB5 AND PB30 WIRES AROUND EACH CONNECTOR OF THEM.
4. MANAGE THE WIRES THAT ARE AROUND THE ELECTRIC FAN ASSEMBLIES NOT TO TOUCH A BLADE OF
ELECTRIC FAN NOR EDGE OF A FAN MOUNT METAL.
5. MANAGE WIRES NOT TO PRESS THE MC701 OF P-PCB WITH THEM.
6. PASS THE SS11 WIRE AND THE SS12 WIREBETWEEN A M8 BOSS AND P-PCB, MANAGE THEM TO KEEP AWAY
FROM A M8 BOSS.
7. PAY ATTENTION NOT TO GIVE ANY LOAD TO THE MC701 OF P-PCB.
29
TH-42PV500E / TH-42PV500B / TH-37PV500E / TH-37PV500B
To Next Page
Loading...
