7.9. Lead of Wiring (9)
1. Make wire dressing as if illustrated below.
Keep moderate slack in wires not give any stress to the connectors.
2. Fix a barrier to a glass holder bottom ass’y by a screw.
Handle a barrier not to protrude from the back end of a bottom shield.
Torque of the screw THEL035N should be 80 to 120 N
cm.
Screws of THEL035N are not reuseble.
30
TH-42PV500E / TH-42PV500B / TH-37PV500E / TH-37PV500B
To Next Page
Loading...
