7.10. Lead of Wiring (10)
MAKE WIRE DRESSING AS IF ILLUSTRATED BELOW.
NOTES:
1. CONNECT CONNECTORS SURELY.
2. KEEP MODERATE SLACK IN WIRES NOT TO GIVE ANY STRESS TO CONNECTORS.
3. CONNECT FFC SURELY.
PAY ATTENTION NOT TO MAKE WRONG DIRECTION CONNECTION NOR INCOMPLETE CONNECTION.
4. BEFORE CONNECTING FLEXIBLE CABLES, CLEAD CONNECTION PARTS BY BLOWING AIR.
31
TH-42PV500E / TH-42PV500B / TH-37PV500E / TH-37PV500B
To Next Page
Loading...
