Panasonic TH-42PV7HS

12 Adjustment
12.1. Sub-Contrast adjustment
Name of measuring instrument Connection Remarks
RF generator
Base Band generator
Preparation (AV) Remarks
1. Receive AV1 (PAL 100% Full White or Split Colour bar shown as below) .
2. Goes into service mode.
3. Push “1” or “2” key, and goes into service mode for “Sub-Contrast”.
Adjustment of AV system Remarks
1. The colour key yellow button of remote control is pushed.
2. The OSD character of sub-contrast becomes red.
(Inside under automatic adjustment)
3. The OSD character of sub-contrast returns to black.
4. End.
Preparation (RF) Remarks
1. Receive RF (PAL 100% Full White or Split Colour bar shown as below.)
2. Goes into service mode.
3. Push “1” or “2” key, and goes into service mode for “Sub-Contrast”.
Adjustment of RF system Remarks
1. The colour key yellow button of remote control is pushed.
2. The OSD character of sub-contrast becomes red.
(Inside under automatic adjustment)
3. The OSD character of sub-contrast returns to black.
4. End.
Preparation (HD) Remarks
1. Receive Component
(1080i/ 60Hz or 1080i/ 50Hz, 100% Full White or Split colour bar as shown below.)
2. Goes into service mode.
3. Push “1” or “2” key, and goes into service mode for “Sub-Contrast”.
Adjustment of HD system Remarks
1. The colour key yellow button of remote control is pushed.
2. The OSD character of sub-contrast becomes red.
(Inside under automatic adjustment)
3. The OSD character of sub-contrast returns to black.
4. End.
30
TH-42PX7A / TH-42PV7AZ / TH-42PV7HS / TH-42PV7M / TH-42PV7MR