Panasonic TH-42PV8D

21
7.12. Remove the C1-Board
1. Remove the tuner unit. (See section 7.4.)
2. Unlock the cable clampers to free the cable.
3. Remove the flexible cables holder fastening screws (×8
).
4. Disconnect the flexible cables (CB1, CB2, CB3 and CB4).
5. Disconnect the flexible cables (C10 and C11).
6. Remove the screws (×4 ) and remove the C1-Board.
7.13. Remove the C2-Board
1. Remove the tuner unit. (See section 7.4.)
2. Unlock the cable clampers to free the cable.
3. Remove the flexible cables holder fastening screws
(×8 ).
4. Disconnect the flexible cables (CB5, CB6, CB7 and CB8).
5. Disconnect the flexible cables (C20 and C21).
6. Disconnect the connector (C23).
7. Remove the screws (×4 ) and remove the C2-Board.
7.14. Remove the front shield unit
assy
1. Disconnect the connector (A11, A51 and A52). (See sec-
tion 7.4.)
2. Remove the screws (×2 , ×2 ) and remove the front
shield unit assy.
7.15. Remove the G-Board
1. Remove the Front shield unit assy. (See section 7.14.)
2. Remove the screws (×2 ).
3. Remove the Front shield case front.
4. Disconnect the connectors (G51).
5. Remove the screws (×3 ).
6. Remove the G-Board.
7.16. Remove the speaker L, R
1. Disconnect the connector (A12). (See section 7.4.)
2. Remove the screws (×4 each) and remove the
speaker L, R.