Panasonic TH-42PV8D

22
7.17. Remove the S-Board
1. Remove the stand brackets. (See section 7.10.)
2. Remove the screws (×2 ).
3. Disconnect the connector (S1).
4. Remove the screws (×2 ) and remove the S-Board.
7.18. Remove the K-Board
1. Remove the S-Board. (See section 7.16.)
2. Unlock the cable clampers to free the cable.
3. Remove the screws (×2 ).
4. Disconnect the connectors (K1) and remove the K-Board.
7.19. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
1. Remove the stand brackets (left, right) fastening screw
(×1 each).
2. Remove the cabinet assy and the plasma panel fastening
screws (×7 ).