LED blinks 8 times
Trouble Mode
SS Energy recovery SOS/Panel
Defective Board (possibility)
SS, D board (SS>,D)/PDP
No
Yes
23
Yes
No
Disconnect
connector SS33 from the
SS board. Plug in the TV
and turn it on
Does the
TV power
up and
stay on?
Is there
approx. 2.7V
at the anode
of D280 on
the SS
board?
Disconnect the TV. Use a volt-meter and place the positive
probe on the anode of D280 on the SS board (See previous
slide for location), while the negative probe is grounded. Plug
in the TV and turn it on
Replace
the D board
Replace
the SS board
Replace
the panel
Warning: Disconnect AC Power prior to making any
disconnection or connection
To Next Page
Loading...
