15
Using DVI input
EXT SP(8Ω,20W[10W+10W])
PC
[AUDIO IN 1]
Audio Out
[AUDIO IN 2]
[R]
[L]
[DVI-D IN]
DVI-D Input Connector Pin Layouts:
Pin No. Signal Name Pin No. Signal Name
1 T.M.D.S. Data2 - 13 —
2 T.M.D.S. Data2 + 14 +5 V DC
3 T.M.D.S. Data2 Shield 15 Ground
4 —
16
Hot Plug Detect
5 — 17 T.M.D.S. Data0 -
6 DDC Clock 18 T.M.D.S. Data0 +
7 DDC Data 19 T.M.D.S. Data0 Shield
8 — 20 —
9 T.M.D.S. Data1 - 21 —
10 T.M.D.S. Data1 + 22 T.M.D.S. Clock Shield
11 T.M.D.S. Data1 Shield 23 T.M.D.S. Clock +
12 — 24 T.M.D.S. Clock -
DVI-I Output Connector Pin Layouts:
Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name
1 T.M.D.S. Data2 - 13 — C1 Analog Red
2 T.M.D.S. Data2 + 14 +5 V DC C2 Analog Green
3 T.M.D.S. Data2 Shield 15 Ground C3 Analog Blue
4 — 16 Hot Plug Detect C4 Analog Horizontal Sync
5 — 17 T.M.D.S. Data0 - C5 Analog Ground
6 DDC Clock 18 T.M.D.S. Data0 +
7 DDC Data 19 T.M.D.S. Data0 Shield
8 Analog Vertical Sync 20 —
9 T.M.D.S. Data1 - 21 —
10 T.M.D.S. Data1 + 22 T.M.D.S. Clock Shield
11 T.M.D.S. Data1 Shield 23 T.M.D.S. Clock +
12 — 24 T.M.D.S. Clock -
When there is no margin in downward
space, please use the L type connector.
In order to connect certainly also including the
case where an L type connector is used, please
tighten the screw of both ends certainly. When
thescrewisnotcertainlybeingxed,connec-
tion of a daisy chain may become unstable.