Panasonic TH-47LFV5W - Daisy-chain Connection; RS-232 C Daisy-Chain Connection; DVI Daisy-Chain Connection

18
Daisy-chain Connection
Youcaninterconnectmultipledisplaystocreateadaisy-chaincongurationforvideowallapplications.
NOTES:
• Use the RS-232C cross cable (female) to connect the computer to this Display,and Display to Display.
• The computer shown is for example purposes only.
• A DVI cable and IR cable are attached.
• When using daisy chain, set the “TILING” menu option in the OSD “CONFIGURATION2 menu”. (see page 27)
• Up to 10 displays can be connected with a DVI daisy chain, but the number of the connected displays may be limited by a
cable signal or equipment to use.
• HDCP can be supported for up to 8 displays for a DVI daisy chain.
• Up to 25 displays can be connected with a RS-232C and IR connection daisy chain.
Display control connection (RS-232C Cable)
Display No.1 Display No.3Display No.2
[RS-232C]
Digital video connection (DVI Cable)
Display No.1 Display No.3Display No.2
[DVI]
In order to connect certainly also including the case where an L type connector is used, please tighten the screw of both ends
certainly.Whenthescrewisnotcertainlybeingxed,connectionofadaisychainmaybecomeunstable.
External IR Connection (Optional)
With the optional “Remote Control Kit” (TY-RM50VW), you can specify the Display ID for daisy-chain connection.
External
IR Receiver
Display No.2Display No.1
Use the “connector cable of remote control”
supplied with TH-47LFV5 series
to connect next display.