TH-50PF30U
5. Remove 6 screws (♦ ) and then remove the flexible
cables from the connectors (CB4, CB5, CB6, CB7, CB8,
CB9).
6. Remove 4 screws (O) and then remove C2-Board.
2. Disconnect the connector (S34).
3. Remove 1 screw (C) and then remove S1-Board.
8.16. Removal of C3-Board
1. Remove the Fan Block (A).
(Refer to remove of Fan).
2. Remove the Slot Block.
(Refer to remove of Slot Block).
3. Remove the A-Board Block.
(Refer to remove of SS-Board).
4. Remove 5 screws and then remove the Hanger Assy L
and the Stand Pole Bracket Assy (L).
5. Disconnect the connectors (C35).
6. Remove the flexible cables from the connectors (C31,
C33, C36).
7. Remove 6 screws ( *) and then remove the flexible
cables from the connectors (CB10, CB11, CB12, CB13,
CB14, CB15).
8. Remove 4 screws (O) and then remove C3-Board.
8.18. Removal of Front Glass, V1,
V2-Board and Cabinet Assy
1. Remove the Speaker Terminal Block.
(Refer to remove of H3-Board Block).
2. Remove the S1-Board Block.
(Refer to Removal of S1-Board)
3. Disconnect the connectors (A11, A22).
4. Remove 7 screws (+) and then remove the Handle Fixing
Metal (L, R).
5. Remove 2 screws (■&).
Note: when fixing Handle Fixing Metal (L, R)
• Screw on 2 screws (1) firstly.
6. Pull the bottom of the Plasma Display Panel forward
(arrow1).
8.17. Removal of S1-Board
1. Remove 2 screws (B) and then remove the S1-Board
Block.
27
To Next Page
Loading...
