85
English
Operating with Web Browser
■ Description of each section
Page tab
Click these to switch pages.
[Status]
Click this item, and the status of the Display is
displayed.
[Display control]
Click this item to display the Display control page.
[Detailed set up]
Click this item to display the advanced settings
page.
[Change password]
[Crestron Connected]
Click this item to display the Crestron Connected
operation page.
[Browser Remote Control]
Click this item to display the Browser Remote
Control on the WEB browser, which is the same as
the supplied remote control.
■ Display status page
Displays the display status.
Click [Status]→[Display status].
Displays the type of Display.
Displays the firmware version of the display.
■ Network status page
Displays the current configuration information of the
network.
Click [Status]→[Network Status].
Displays the configuration details of wired LAN.
■ Input information page
Displays the input information of this unit.
Click [Status]→[Input status].
Displays the information of the input terminal.
Displays the information of the input signal.
Note
●
If an input is other than USB input, the name of the
input signal is displayed.
●
In the case of USB input, the name of the file being
played is displayed.
●
[----] is displayed in standby mode.
■ Basic control page
The basic operations of the unit can be performed.
Click [Display control]→[Basic control].
Power On/Off control
Use these to select the input signals
AUDIO mute
Switches aspect mode
To Next Page
Loading...
