English
26
Remote Control Transmitter
1 Standby (ON/OFF) button ( / )
●
Turns the power on or off when the Display is
turned on at the <Main Power On / Off button>.
(see page 27)
2 POSITION
(see page 35)
3 SETUP
(see page 43)
4 ENTER / Cursor buttons (
)
●
Used to operate the menu screens. (see page 33)
5 ZOOM
Enters the digital zoom mode. (see page 32)
6 DEFAULT
●
Resets the settings of picture, sound, etc., to
defaults. (see page 35, 37, 38)
7 MUTE
●
Sound mute on / off. (see page 30)
8 ASPECT
●
Adjusts the aspect. (see page 31)
9 VOL + / VOL -
●
Adjusts sound volume level. (see page 29)
10 AUTO SETUP
●
Automatically adjusts the position/size of the
screen. (see page 35)
11 INPUT
●
Switches input to display on the screen. (see page
28)
12 PICTURE
(see page 38)
13 SOUND
(see page 37)
14 RECALL
●
Displays the current setting status of Input mode,
Aspect mode, etc. (see page 29)
15 RETURN
●
Used to return to the previous menu. (see page 33)
16 FUNCTION
●
Displays [Function button guide].
(see page 55)
17 OFF TIMER
●
Switches to stand-by after a fixed period. (see
page 30)
18 Numeric buttons (1 - 6)
●
Used as shortcut buttons by assigning frequently
used operations. (see page 56)
19 Signal emission
Note
●
In this manual, buttons of the remote control and the
unit are indicated as < >.
(Example: <INPUT>.)
The operation is mainly explained indicating the
remote control buttons but you can also operate with
the buttons on the unit when there are the same
buttons.
To Next Page
Loading...
