75
English
Display which appears when the connection failed.
Command port set up page
Set the port number to be used with command control.
Click [Detailed set up], then [Command port set up] to
display the Command port set up page.
Input the port number to be used with command
control.
Setting update button.
[Browser Remote Control]
It is possible to operate the display with the operation
buttons displayed on the WEB browser.
Click [Browser Remote Control].
The [Browser Remote Control] screen is displayed.
Browser Remote Control
The Browser Remote Control can be operated in the
same way as the supplied remote control.
For allocation / function of each button, see page 26.
To finish the Browser Remote Control, click
[Display Control Window] or exit the browser.
To Next Page
Loading...
