Panasonic TH-65PF12EK - DVI-D and Component;RGB Connections

SLOT2
AUDIO
DVI-D IN
SLOT3
P R /C R /R P B /C B /B Y/G
COMPONENT/RGB INLAN
AUDIO
AUDIO
OUT
Y , P
B , P R ,
OUT
P
R
P B
Y
L
R
CO
MP
O
NEN T VIDE
O
O
UT
11
Connections
DVI-D connection
Mini-plug (M3)
DVI-D
video cable
(Within 5 m)
PC with DVI-D
video out
Pin No. Signal Name Pin No. Signal Name
1
T.M.D.S. data 2-
13
2
T.M.D.S. data 2+
14
+5 V DC
3
T.M.D.S. data 2 shield
15
Ground
4 16
Hot plug detect
5 17
T.M.D.S. data 0-
6
DDC clock
18
T.M.D.S. data 0+
7
DDC data
19
T.M.D.S. data 0 shield
8 20
9
T.M.D.S. data 1-
21
10
T.M.D.S. data 1+
22
T.M.D.S. clock shield
11
T.M.D.S. data 1 shield
23
T.M.D.S. clock+
12 24
T.M.D.S. clock-
Notes:
• Additional equipment, cables and adapter plugs shown are not supplied with this set.
• Refer to page 49 for applicable input signal.
• Use the DVI-D cable complying with the DVI standard. Image deterioration may occur depending on the length or
the quality of the cable.
DVI-D Input Connector
Pin Layouts
Connection port view
16
17
24
8
1
9
COMPONENT / RGB connection
Notes:
• Change the “Component/RGB-in select” setting in the “Setup” menu to “Component”
(when Component signal connection) or “RGB” (when RGB signal connection). (see page 46)
• Additional equipment, cables and adapter plugs shown are not supplied with this set.
• Sync on G signal is needed. (see page 50)
RCA-BNC
adapter plug
Mini-plug (M3)
Computer RGB Camcorder
or
DVD
Example of input signal source
Digital TV-SET-TOP-BOX
(DTV-STB)
This unit has terminal boards equivalent to DVI-D Terminal Board (TY-FB11DD) as standard equipment.