Panasonic TH-65PF20U - Removal of A-Board; Removal of PB-Board; Removal of Fan

23
TH-65PF20U
9.5. Removal of A-Board
1. Remove the HX-Board Block.
(Refer to Removal of HX-Board)
2. Disconnect the connectors (A5, A8, A9, A10, A11, A13,
A22, A25, A35).
3. Remove the flexible cables from the connectors (A1, A20,
A31, A32).
4. Remove 4 screws and then remove A-Board.
Note: when fixing A-Board
• Put the flexible Cable between the Fixed Metal and A-
Board when connect the flexible Cable to the connector
(A1).
9.6. Removal of PB-Board
1. Disconnect the connectors (PB30, PB32, PB33, PB34,
PB35).
2. Remove 2 screws and then remove PB-Board.
9.7. Removal of Fan
1. Disconnect the Fan Relay Connectors.
2. Remove each 2 screws and then remove the Fan.
3. Remove each 1 screw ( ) and then remove the Fan from
the Fan Fixed Metal.
4. Remove each 4 Fan Corner Sponges from the Fan.
5. Reassemble the Fans in reverse order.
6. Stick the Fan Sponges around the Fan.
Note:
The Fan Sponge is not re-usable.
Please use a new one when Fan exchange.