Panasonic TH-65PF20U - Page 29

29
TH-65PF20U
5. Remove 4 screws and then remove the Slot Block.
6. Disconnect the connector (A14).
7. Remove 4 screws and then remove the HX-Board Block.
8. Disconnect the connectors (A8, A9, A10, A11, A22, A25,
A35).
9. Remove the flexible cables from the connectors (C21,
C31, SC20).
10. Remove 5 screws.
11. Remove 2 screws and then remove the Speaker Terminal
Block.
12. Remove 2 screws and then remove the S1-Board Block.
13. Remove the flexible cables from the connectors (SU1,
SU2, SU3, SU4, SU5, SU11, SD1, SD2, SD3, SD4, SD5,
SD11).
14. Disconnect the connectors (SU41, SD42, SD46).
15. Remove 6 screws ( ).
16. Remove 4 screws ( ) and then remove SU-Board and
SD-Board.
Note: when fixing SU-Board and SD-Board
• Screw on 2 screws (1) firstly.
17. Disconnect the connectors (SC2).