To Next PageTo Next PageWhy can't my Panasonic Monitor receive the LightID?
If the LightID cannot be received on your Panasonic Monitor, ensure that [LightID] is not set to [Off] and that intense light is not hitting the LCD panel.
Why is there no picture or sound from Panasonic Monitor's [DIGITAL LINK] terminal?
If there's no picture or sound output from the [DIGITAL LINK] terminal on your Panasonic Monitor, check the connection between the video (output) equipment and the twisted pair cable transmitter. Also, ensure that [Network settings] - [DIGITAL LINK mode] is not set to [Ethernet].
Why is the LAN uncontrollable on my Panasonic TH-70SF2HU Monitor?
If the LAN is uncontrollable on your Panasonic Monitor, verify that the connection has been made properly, [Network settings] - [Network control] is set to [On], and [LAN setup] is configured correctly.
Why is the RS-232C uncontrollable on my Panasonic TH-70SF2HU?
If the RS-232C is uncontrollable on your Panasonic Monitor, check if the connection has been made properly and ensure that [Network settings] - [Serial control] is set to [SERIAL IN].
What to do if Panasonic TH-70SF2HU sometimes has no picture or sound?
If you sometimes experience no picture or sound output from your Panasonic Monitor, try powering it off and on again. Alternatively, replace the selector or distributor.
How to enable [Controller ID function] on Panasonic TH-70SF2HU?
To enable the [Controller ID function] on your Panasonic Monitor, verify that the [Controller ID function] is set to [On], or the switch is set to .
What to do if my Panasonic TH-70SF2HU Monitor has no picture but normal sound?
If there's no picture but normal sound on your Panasonic Monitor, check if the input signal has a non-applicable color system format or frequency.
What to do if Panasonic Monitor displays 'no picture' error?
If your Panasonic Monitor displays a 'no picture' error or the remote control suddenly stops working, remove the power plug from the socket outlet and reinsert it after 5 seconds or more to turn the power back on.
Why does my Panasonic TH-70SF2HU Monitor power off automatically?
If your Panasonic Monitor's power unexpectedly turns off, check the settings for [No signal power off], [HDMI1 power management], [HDMI2 power management], [DIGITAL LINK power management], [DVI-D power management], [PC power management] and [No activity power off].
Why is my Panasonic TH-70SF2HU Monitor remote control not working?
If your Panasonic Monitor remote control isn't working, check if the batteries are completely discharged or improperly inserted. Also, ensure that the remote control sensor isn't exposed to outdoor light or strong fluorescent light and that there are no obstacles between the sensor and the remote.
General| Screen Size | 70 inches |
|---|---|
| Panel Type | IPS |
| Brightness | 500 cd/m² |
| Refresh Rate | 60 Hz |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Weight | 31.5 kg |
| Built-in Speakers | Yes (10 W x 2) |
| VESA Mounting | 400 x 400 mm |
| Display Type | LCD |
| Aspect Ratio | 16:9 |
| Viewing Angle | 178° |
| DisplayPort | 1 |
| Output Terminals | Audio Out |
| Input Ports | HDMI |
| Resolution | 1920 x 1080 pixels |
| Contrast Ratio | 1, 200:1 |
| Response Time | 8 ms |
