27
TH-80LFB70E
Attention when replacing A-Board
• The shield is not attached to A-Board for repair.
Please be sure to remove a shield from A-Board and reuse
it.
• When attaching a shield to A-Board, please check whether it
is correctly inserted in all the shield clips.
* When the shield is not correctly inserted in all the shield
clips, fitting of Terminal Bracket Metal and the hexagon
screw of a DVI terminal worsens, and it may be unable to
attach a hexagon screw.
Caution when replacing A-Board
• When replacing the A-Board, please be sure to restick a
Heat Sheet on the original position.
• Please stick PET+AL-tape and Aluminum tape on the posi-
tion of the following figure after attaching a shield to A-
Board.
To Next Page
Loading...
