50
TH-80LFB70E
7.21. Attachment procedure of Touch Panel Filter
1. Insert the TP PCB Cover Metal in the Cabinet as shown in the following figure.
2. Insert the Touch Panel Filter between TP PCB Cover Metal and the Cabinet as shown in the following figure.
* Please insert so that the convex side of the Touch Panel Filter (X, Y) becomes inside.
* If it inserts from the both ends of a Touch Panel Filter, it will become easy to do work.
3. Fix the TP PCB Cover Metal with screws.
* Tighten securely to the screw hole of the mark on the TP PCB Cover Metal.
To Next Page
Loading...
