Panasonic TH-85VX200W - Setup Menu; Input Signal Selection

41
1
Display the menu screen.
2
Select “Setup”.
Setup
Pos. /Size
Sound
Picture
2
access
1
select
3
Select the item and set.
External scaler mode
Power save
PC Power management
Auto power off Off
Off
Off
Off
OSD design Type1
OSD position Upper left
OSD Language English (UK)
Signal
Extended life settings
Screensaver
Network Setup
Input label
Component/RGB-in select
RGB
3D Settings
2
adjust
1
select
4
Exit the menu.
Setup menu
Component / RGB-in select
Component RGB
Select to match the signals from the source connected to the Component / RGB or PC input terminals.
Y, P
B
, P
R
signals “Component”
RGB signals
“RGB”
Note:
Make setting of the selected input terminal (COMPONENT RGB IN or PC IN).
YUV / RGB-in select
YUV RGB
Select to match the signals from the source connected to the DVI input terminals.
YUV signals
“YUV”
RGB signals
“RGB”
Notes:
• Selection may not be possible, depending on which optional board is installed.
• Make setting of the selected input terminal (SLOT).