44
3D Settings
If the 3D images are not displayed correctly or seem unusual, please adjust and setup the 3D settings.
• 3D Picture Display
3D 2D
3D: Use of 3D Eyewear. You can see 3D images for 3D image signal and 2D images for 2D image signal.
2D: No use of 3D Eyewear. You can see 2D images instead of 3D images.
When set to “3D”, “3D” is displayed during 3D images.
• 3D Picture Format
3D images method is set.
Auto: 3D images are automatically displayed according to the signal.
Side by Side/Top and Bottom: One of the formats of the 3D standard. Select these formats as necessary.
Native: Displays the input signal as it is. Use to identify the format type of the input signal.
• 3D Picture Sequence
Reverse Normal
This function calibrates the timing to switch the right and left images as well as the timing to switch the shutter of
right and left 3D Eyewear.
Select “Reverse” if you feel that the sense of depth is unusual.
• Safety Precautions
Displays the precautions for viewing 3D images.
2
access
1
select
2
change
1
select
Setup menu
Select the item and set.
PC
NANODRIFT
16:9
3D
External scaler mode
Power save
PC Power management
Auto power off Off
Off
Off
Off
OSD design Type1
OSD position Upper left
OSD Language English (UK)
Signal
Extended life settings
Screensaver
Network Setup
Input label
Component/RGB-in select
RGB
3D Settings
3D3D Picture Display
Normal
Auto
3D Picture Format
3D Settings
3D Picture Sequence
Safety Precautions
To Next Page
Loading...
