TH-L32C4M
22
8 Measurements and Adjustments
8.1. Voltage chart of A-board
Set A-Board to a dummy set and check the satisfaction with the specified voltage as following table.
8.2. Voltage chart of P-board
Set IP-Board to a dummy set and check the satisfaction with the specified voltage as following table.
Power Supply Name Measurement Point Specification (V) Remark
SUB1.8V TP8700 1.74 - 1.90 -
SUB1.2V TP8000 1.18 - 1.32 -
SUB3.3V TP8701 3.19 - 3.46 -
SUB5V TP8702 4.9 - 5.1 -
STB5V TP5400 4.9 - 5.1 -
PNL5V TP8307 4.9 - 5.3 TNP4G515 only
VOLTAGE TEST POINT SPECIFICATION (V) STATE
PFC390V
+TP7201, TP7202 390 ± 15 Reception * HOT
-TP7203, TP7204 - Reception * HOT
DTV16V TP7503, TP7505 15.6 ± 1.5 Reception
STBY6V TP7506
5.8 ± 0.8 Reception
5.8 ± 0.8 Stand By