Panasonic TH-P50ST60A - Auto Standby; Eco Navigation; No Signal Power off; USB Device Setup

- 153 -
Daylight Saving Time
Selects time offset from the standard time for Summer Time.
(Auto / Off / + 1/2 hour / + 1 hour)
Watching Basic Adjusting time
Region Select
Selects the region where you live to adjust the standard time.
(NSW / ACT / Victoria / Queensland / South Australia / Western Australia /
Northern Territory / Tasmania)
Watching Basic Adjusting time
Auto Standby
Automatically turns the TV to Standby mode for energy saving when no
operation is performed for 4 hours.
(On / Off)
●
Starting Timer Programming automatically does not affect this function.
●
Automatic input switching with the connected equipment affects this
function and time-count will be reset.
●
The notification message will appear 3 minutes before going into Standby
mode.
No signal Power off
Automatically turns the TV to Standby mode to prevent unnecessary power
consumption when no signal is received and no operation is performed for 10
minutes.
(On / Off)
●
The notification message will appear 3 minutes before going into Standby
mode.
Setup
Eco Navigation
Automatically sets the TV to the most suitable energy-saving mode.
The concerned items and their current settings are displayed. Select Set to
Eco to set them to the energy-saving settings at once.
USB Device Setup
Formats the USB HDD or safely removes USB device.