- 55 -
Timer Programming
Setting timer programming
The Timer Programming menu allows you to select programmes that you
want to be reminded to watch or record to the USB HDD. At the correct time,
the TV will tune to the correct channel even if the TV is in Standby mode.
●
Not valid in Analogue TV
1. Select Digital TV with TV
2. Display the menu with MENU
3. Select Timer
Timer Programming with / and press OK to access
■ Set timer programming event details
1. Press OK to start making the settings
2. Select USB HDD Rec. / Reminder with
/
USB HDD Rec.:
Records the programme to the USB HDD.
When the start time comes, the channel will be switched automatically
and the video and audio signals will be output. 2 minutes before the
starting time, a reminder message appears if you are watching TV.
Reminder:
Reminds you to watch the programme.
When you are watching TV, a reminder message appears 2 minutes
before the starting time. Press OK to switch to the programmed
channel.
3. Select the item (channel, date and starting / ending time) with
/ and
set / / with /
●
and can also be entered with numeric buttons.
To Next Page
Loading...
