- 155 -
Update Channel List
Updates the channel list while keeping your settings.
Watching Tuning and editing channels Update Channel List
●
For Digital TV
New Channel Message
(On / Off)
Selects whether to give a notification message when a new channel is found.
Watching Tuning and editing channels New Channel Message
●
For Digital TV
Signal Condition
Checks the signal condition.
Watching Tuning and editing channels Signal Condition
●
For Digital TV
Add TV Signal
Adds the TV mode.
●
This function is available if you skip any modes to tune in Auto Tuning for
first using the TV.
= Note =
The settings in Tuning Menu are applicable only for the selected TV mode.
The menu name varies depending on the TV mode. (Digital TV Tuning Menu /
Analogue TV Tuning Menu)
Display Settings
Teletext
This item is not used for this model.
Input Labels
Accesses the input labels list to select the label of each input mode or set to
skip unconnected one for easier identification and selection in Input Selection
or banner.
Watching External equipment Watching external input
●
To name each input mode freely, select User input and set characters
(maximum 10 characters).
To Next Page
Loading...
