13
Dual Touch
Touchscreen Calibration
A standard user needs to perform the calibration as an administrator before performing the calibration for each user.
Calibration by an administrator
NOTE
z At first, log on to Windows as an administrator, and perform this calibration.
z Return the rotated display to [Landscape] before the touchscreen calibration.
1 Run [Tablet PC Settings].
Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].
2 Click [Calibrate].
3 Select [Touch input].
4 Using your finger, touch each of the “+” target marks one by one.
Calibration by a standard user
NOTE
z Perform the following calibration for each user.
1 Run [Tablet PC Settings].
Click (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Settings].
2 Click [Calibrate].
3 Select [Touch input].
4 Using your finger, touch each of the “+” target marks one by one, and then click [OK].
z Perform the calibration for the orientation to be used.
To Next Page
Loading...
