52
IEEE 1394 Devices
You can connect a digital video camcorder or other IEEE 1394 standard device to the computer.
To connect IEEE 1394 device
1 Turn on the computer and the IEEE 1394 device.
2 Open the cover and connect the IEEE 1394 device to the IEEE
1394 interface connector (A).
For further information, refer to the instruction manual of the IEEE 1394 device.
NOTE
z You may need to install the driver for the IEEE 1394 device. Follow the on-screen instructions or refer to the instruction
manual of the IEEE 1394 device.
To remove IEEE 1394 device
CAUTION
z Turn off the IEEE 1394 device only after turning off the computer.
1 Turn off the computer and disconnect the cable from the IEEE 1394 interface connector.
2 Turn off the IEEE 1394 device and remove the cable.
To Next Page
Loading...
