47
Port Replicator / Car Mounter
6 At the completion message, click [Close].
7 Click [Close].
8 When the message requests restart of Windows, click [Yes].
The computer will restart.
The message of Display Rotation Tool “Unsupported Touchpad Driver.” will be appeared.
NOTE
z If you cannot use the functions of the external mouse and trackball even after the steps above, perform the steps
below.
A Turn off the computer and connect to the port replicator or to the car mounter.
B Connect the external mouse or trackball to the port replicator or to the car mounter.
C Turn on the computer and start up the Setup Utility (Î page 88).
D Select the [Main] menu, and set [Touch Pad] to [Disabled].
E Press
F10
, and then select [Yes] and press
Enter
.
F Log on to Windows as an administrator.
G When the message requests restart of Windows, click [Restart Now].
The computer will restart.
H Install the necessary driver following the operating instructions of the connected device.
To Next Page
Loading...
