68
Camera
z You can assign the Zoom In function to the Tablet Button.
(Î page 72 “Assigning the Snap/Zoom In/Light Functions to the Tablet Button”)
z Each time you click
the magnification ratio goes up in the order of [x 1.0], [x1.5], [x 2.0], [x 2.5], [x 3.0].
To return to [x 1.0], click
when the ratio is [x 3.0].
Scroll Mode Zoom
To enlarge or reduce the image by scrolling.
1 Click or click [Control] - [Scroll Mode] - [Zoom].
2 Scroll upward to enlarge the image and downward to reduce.
z Trace the camera image up and down or put the mouse pointer over the image to drag up and down.
z You can change the magnification ratio between [x 1.0] and [x 3.0].
Scroll Mode Pan
Scroll the enlarged camera image from side to side and up and down.
1 Click or click [Control] - [Scroll Mode] - [Pan].
2 Trace the camera image from side to side and up and down or put the mouse pointer over
the image to drag from side to side and up and down to scroll.
NOTE
z You cannot use this function when the magnification ratio is less than [x 1.2].
Take and Edit Mode
To fix the camera image.
1 Click or click [Control] - [Take and Edit Mode].
z Click or click [Take and Edit Mode] again to return to the actual camera image.
z When you take a picture with the camera image fixed, the fixed image is recorded even if you change the
direction of camera.
z You can adjust the camera image using Zoom In or Pan.
To Next Page
Loading...
