83
Wireless LAN
A Click , or on the notification area, click [Open Network and Sharing Center] - [Set up a connection or net-
work] - [Manually connect to a wireless network] and click [Next].
B Input necessary information and add check marks for [Start this connection automatically] and [Connect even if the
network is not broadcasting] and click [Next].
<For model with Intel
®
Centrino
®
Advanced-N 6205>
1 Double-click / / on the notification area.
The [Intel
®
PROSet/Wireless] screen appears.
z When or is displayed, skip step 2.
2 When you double-clicked in step 1, slide the wireless switch to turn on.
3 Click [Profiles...] at the lower right corner of the window, and click [Add...].
4 Enter the profile name and wireless network name (SSID), and make other necessary
changes, then click [Next].
5 Make necessary settings and click [OK].
6 Select the profile you set and click [Connect].
7 Click [Close].
<For model with Atheros AR928X>
1 Right-click / / / / on the notification area.
The [Atheros Client Utility] screen appears.
z When
, , or is displayed, skip step 2.
2 When you double-clicked in step 1, slide the wireless switch to turn on.
3 Click [Profile Management], and click [New].
Setting the Profiles
To Next Page
Loading...
