17
Following that:
Plug in the AC adapter, and fully charge your battery.
Use a spare battery if you have one.
If you have neither the AC adapter nor an extra battery, power the computer off.
save your data and power off your computer
When the remaining battery charge becomes low
Battery Power
* When disabling the speakers with the Setup Utility (or pressing Fn + F4 ), the
warning beep is also disabled.
Power settings, e.g., warning* for a low battery level, can be made in
[Control Panel] - [Power Management].
CAUTION
Alarm Settings (in [Control Panel] - [Power Management] - [Alarms])
Set the value for the [Critical battery alarm] to 4% or more. This is necessary
for the suspend or hibernation function to be completed (assuring data is saved)
when the battery level is low.
Do not add a check mark to [Display message] for [Notification] in [Alarms] -
[Alarm Actions]. This may prevent the computer from resuming.
When making a setting for [When the
alarm goes off, the computer will:], add a
check mark to [Force standby or shut-
down even if a program stops respond-
ing]. Connect the AC adapter when the
computer shuts down or enters the sus-
pend or hibernation mode by this func-
tion. If the computer starts up or resumes
while the AC adapter is not connected,
Windows may not operate properly or
alarm operations may stop working.
To Next Page
Loading...
