Setup Utility
32
Getting Started
*1
Time is shown in 24-hr. style.
*2
Date is shown in order of Month/Day/Year.
*3
The
Tab
key can be used to move the cursor.
Parameters
(An underline indicates the factory default settings)
Main Menu
System Time:
[xx:xx:xx]
*1*3
System Date:
[xx/xx/xxxx]
*2*3
Touch Pad: [Enable]
Fn/Ctrl Key: [Normal]
Display: [Simultaneous]
Display Expansion: [Enable]
CD/DVD Drive Speed: [High]
Touch Pad
z Select whether to use the touch pad ([Enable]) or not ([Dis-
able])
Disable
Enable
Fn/Ctrl Key
z Select whether to switch the
Fn
functions with the
Ctrl
functions, and vice versa on the internal keyboard
z Do not attempt to replace the markings on the keys, or the
keys themselves
Normal
Replace
Display
z The display destination in cases where Windows is not run-
ning is set here
z If an external display is not connected, all information will
appear on the internal LCD even if [External Monitor] or
[Simultaneous] is selected.
After Windows starts up, the screen is displayed on the dis-
play destination set in the following menu
[start] - [Control Panel] - [Other Control Panel Options] -
[Intel(R) Extreme Graphics] - [Devices]
External Monitor
Internal LCD
Simultaneous
Display Expansion
z Select whether to have the display expanded when not
using the native screen resolution
Disable
Enable
CD/DVD Drive Speed
z Select whether to set the DVD-ROM & CD-R/RW drive
speed to fast ([High]) or slow ([Low])
High
Low
To Next Page
Loading...
