61
Important Information
F Press the
Y
key.
Hard Disk Data Erase Utility will start.
(All of the screens below are only examples.)
G When [<<<Start menu>>>] is displayed, press the
Enter
key.
H The approximate time required for erasing data will be displayed.
Press the
Space
key.
I At the confirmation message, press the
Enter
key.
The operation of erasing the hard disk starts.
z If necessary, the “hard disk data erase” operation can be cancelled
after it has begun by pressing the
Ctrl
+
C
key.
If the operation is cancelled before being completed, a part of data will
not be erased.
J The message "[Recovery] is complete" will be displayed. Remove the
Product Recovery DVD-ROM, and press any key to shut down the com-
puter.
z If a problem occurred during the operation, an error message will be
displayed.
To Next Page
Loading...
