Panasonic TX-28WG25 series

Type of
Stereo
Type of broadcast On-screen indication
Remark
Reguiar broadcast
(Standard Audio)
Reguiar
+
NICAM MONOI
(MAiN(I))
NICAM STEREO
NiCAM DUAL MONO
(MAIN(I)/SUB<n))
Normai use
You can select
either the
“MAIN<I>” or “MONO”
audio signal.
You can select
either the
“STEREO” or “MONO’
mode.
You can select
either the
“MAIN(l), SUB(ID
or MONO”.
Reguiar broadcast
(Standard Audio)
BiUNGUAL or
DUAL MONO:
MAINa)/SUB(n)
Normai use
You can select
either the
“MA1N<I)” or “SUB<II>”
audio signal.
You can select
either the
"STEREO” or “MONO”
mode.
Note:
(1) Even when the contents of the receiving signal undergo changes, seiection mode is kept intact.
(2) When the receiving conditions deteriorate, listening will be easier if the mode is set to the “MONO” position,
using the Stereo/Bilingual Sound selection button as shown on page 42.
(3) “DUAL”, also known as “DUAL MONO” or as “BILINGUAL” is not currently transmitted in some countries.
43