Panasonic TX-28WG25 series

Since a large picture tube has been used, blurring of colours and patches strange colouration may occur
depending on the direction the television faces. This is caused by a geomagnetic effect.
For optimum viewing, it is necessary to adjust the TV placement.
’4 The Power should be off when determining the
* installation location and direction.
At this time please verify what direction the TV
screen is to face (direction indicated by the
arrow).
Push the “Main Power Switch”.
MAIN MENU P^sh the “Main Menu” Button.
%
ASPECT
PICTURE
SOUND
FEATURES
PRESET
UVNGUAGE
ENGLISH
<^S{§
“Main Menu” Condition.
A Select the Feature Menu by
^ _ ’—' _ using the Position Up “a” or
H] LS Down “v” Button.
%
ASPECT
PICTURE
SOUND
FEATURES
PRESET
LANGUAGE
ENGLISH
c I— Push the Position Left “<”or
^ ^ Right “>” Button.
BLUE BACK OFF
VCR/GAME OFF
P•DE ON
GAME MODE AV2
SELF ASPECT JUST
SIDE BAND LIGHT 1
GEOMAGNETIC 4
“Features Menu” Condition.
c Select the Geomagnetic Mode
^ — _ by using the Position Up “a” or
QJ LH Down “v” Button.
BLUE BACK OFF
VCR/GAME OFF
PDE ON
GAME MODE AV2
SELF ASPECT JUST
SIDE BAND LIGHT 1
.GEOMAGNETIC 4
y — Adjust the placement so that
* _'—* the coloured patches in the
i corners of the screen do
O not appear.
BLUE BACK OFF
VCR/GAME OFF
P•DE ON
GAME MODE AV2
SELF ASPECT JUST
SIDE BAND LIGHT 1
GEOMAGNETIC 5
'f' H elpful Hint
(1) If geomagnetic changes still cause colour patches on the screen even after the TV is installed, turn the power off
and turn back on again after about 30 minutes.
(2) Adjustment for geomagnetism should be performed every time the location of the TV is changed,
(3) In some cases colour patches will not be completely eliminated even after adjustment, particularly in ferro-concrete buildings
and other stmctures susceptible to geomagnetism. In these cases adjust by changing the installation location.