18
Renaming a programme channel
Move to the
Name
column
Choose the new character. The box at the bottom of the
screen shows the character currently selected.
Move to the next character position
Continue until renaming is done
Press
STR
to store the new name
Locking a programme channel
You may wish to lock a programme channel to prevent
access to it
Move to the
Lock
column
Choose between Lock
On
or Lock
Off
Press
STR
to store the new setting
Note:
D
When a programme position is locked, Direct
Channel Access using the
C
and numeric buttons on
the remote control is not available
Copying programme information to a VCR / DVD recorder
The following features are only available from the device
connected to the scart socket selected using “Q---Link“.
(see page 15).
You can copy programme information to a compatible
recording device connected to AV2 or AV4 (see page 34for
connection information)
Press the blue button.
Programme data will now be sent to the recording device.
This might take a few seconds, depending on the number
of stations stored. If the message “Feature not available”
appears on the screen, the television is unable to send the
programme information to the recording device. See the
device’s instruction book for further information.
Note:
D
If you have a Q---Link recording device, ensure that
it is in
Standby
mode. If your device is not Q---Link
compatible, please refer to the device’s instruction
book.
Tuning menu --- Programme edit
STR
STR
To Next Page
Loading...
