Panasonic ULTRAHD DMR-UBC70 - Setup and Settings; Basic Settings

Setup
TQBS0166
51
Basic Settings
You can change the unit’s settings below.
1 Press [FUNCTION MENU].
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select the menu, then press [OK].
4 Select the item, then make the setting.
To return to the previous screen
Press [RETURN ].
[UBC70] DVB Tuning
Favourites Edit
You can create four favourites of channels for
making viewing and recording easier.
After editing as follows, save the Favourites.
Press [RETURN ], then press [OK].
• To select the other Favourites list:
Press the green button.
• To add channels to the Favourites list:
Select the channel in the “All DVB Channels”
column, then press [OK]. Repeat this step.
• Red: Change the sorting mode.
• Yellow: Add continuous block of channels to
the list at once.
•Press [3, 4] to make the block, then press
[OK].
• Blue: Select the Category.
• To change the order of the channels list:
1 Select the channel to move, press the green
button.
2 Select the new position, then press the
green button.
Setup
Basic Settings
OK
RETURN
DVB Tuning
HDD / Disc / USB HDD
Picture
Sound
Display
Connection
Network
Others
• To delete channels:
Select the channel, press [OK].
• Yellow: Delete all channels.
• To change the name of the Favourites list:
1 Press the red button.
2Press [3, 4, 2, 1] to select a character,
then press [OK].
Repeat this step to enter other characters.
• Red: Delete a character.
• Blue: Delete all characters.
3Press [RETURN ].
Auto Setup
You can restart the Auto Setup. (> 9)
1 Select “Yes”, then press [OK].
• If the country selection screen appears:
Select the country, then press [OK].
2 Follow the on-screen instructions and make
the following settings.
[DVB-C]
1 Select “Digital Cable Channels”, then
press [OK].
2 Select “Preset Channel Number” or
“Operator’s Channel Number ( LCN )”,
then press [OK].
3 Select the items and change the items.
(For details, consult the cable company.)
Search Mode
• All Channels
• Free Channels
Scan Mode
•Quick
•Full
Frequency/Symbol Rate/Network ID
Normally set to “Auto”.
If “Auto” is not displayed or if necessary,
enter the value specified by your cable
company with number buttons.
4 Select “Start scan”, then press [OK].
Auto Setup starts.
[DVB-T] [DVB-T 2]
Select “Digital Terrestrial Channels”, then
press [OK].
Auto Setup starts.

• The timer recording programmes are cancelled.
• If the channel you are looking for is not found, select “Full”
for “Scan Mode”. (> above)
DMRUBC70-UBS70EG-TQBS0166_eng.book 51 ページ ２０２２年１０月３１日 月曜日 午後３時１２分