Using Do-Not-Disturb
‘.
Waiting for an Outsida Line
Responding to Message Waiting Requests
The MSGE indicator flashes when you have a message
waiting.
1. Pick up the handset or press ON/OFF.
2. Press AUTO.
.3. Do one of the following:
If..; Then. . .
You want to answer the mes-
Press REI.JIAL.
sage waiting request
You want to cance1 die mes- Press FLASH.
sage waiting request
Scrolling Through Messages
1. Pick up the handset or press ON/OFF.
2. Press CONF twice to view the next message.
3. Press # to scroll through messages.
4. Press ON/OFF.
Using Do-Not-Disturb
Use DND (Do-Not-Disturb) to temporarily stop calls from
coming to your extension.
1. Pick up the handset or press ON/OFF.
2. Dial 73.
If DND is on, this step turns it off. If DND is off, this step
turns it on.
Waiting for an Outside Line
If all outside lhles are busy, you cau have the DBS notify you
when an outside line is available.
Having an Open Line Call You Back
1. Pick up the handset or press ON/OFF.
2. Attempt to access an outside line.
3. When you hear the busy tone, press 2.
4. Press ON/OFF again.
When the outside line is available, your phone rings and the
FF key for the outside line flashes.
5. Pick up the handset or press ON/OFF.
6. Dial the phone number.
Using Account Codes
Account Codes can be used in different ways, dependiug on
how your system is set up. The following table describes the
type of account codes that may be available for your extension,
This table also itlcludes examples of how the different types ol
account codes can be used.
See your system administrator or DBS dealer for the account
code capabilities assigned to your extension.
3. Press ON/OFF.
3. Placing Outside Calls
To Next Page
Loading...
