Service Menu
PV-GS39
Service Menu
Automatic diagnosis code will be displayed. (Service Menu)
To enter the Service Menu
Push the [PHOTO SHOT], [JOYSTICK CONTROL LEFT] and [RECORDING
START/STOP] simultaneously for 3 seconds (with no SD Card inserted).
Note:
If a Tape or SD Card is inserted, the above operation will not work.
To select the Item:
1. Press the [JOYSTICK CONTROL UP/DOWN] to select item [3].
2. Press the [JOYSTICK CONTROL RIGHT] to display [YES/NO] screen.
3. Press the [JOYSTICK CONTROL UP/DOWN] to select [YES].
4. Press the [JOYSTICK CONTROL CENTER].
Note:
Only perform items 3 in the Service Menu.
To exit the Service Menu
Unplug the AC Cord.
To Next Page
Loading...
