Panasonic VL-MW251CX - Intercom; Talking between stations

32
Intercom
Talking between the main monitor station and the sub monitor station
Intercom calls between the main monitor station and the sub monitor station can be made. (The other party’s
image is not displayed.)
LBoth the main monitor station and the sub monitor station can transfer a door call using the same operation.
LWhen using multiple sub monitor stations, you can make intercom calls between the sub monitor stations.
{TALK} and indicator
{OFF}
{PAGE}
{MENU}
{VOLUME}
{D}
{OFF}
TALK indicator
{
▲
} {▲}
{PAGE}
{TALK}
Caller Receiver
1 Press {PAGE} and talk to the other party.
LThe TALK indicator lights up.
1 When the paging call is heard, press {TALK}.
2 When the paged party answers the call, talk with
the paged party.
2 Talk with the other party.
3 To end the intercom call, press {OFF}.
LThe intercom call is disconnected.
N When using multiple sub monitor stations
When you press {PAGE} in step 1, the following is displayed.
Select the party that you want to page:
: Press {VOLUME} (
▲
) or {PAGE} (▲), then
press {MENU} (OK).
: Press {▼} or {▲}, then press {D} (OK).
Note:
LAn intercom call will automatically end in about 90 seconds.
When receiving a call from the door station during an intercom call:
1 Press {OFF} to end the intercom call.
2 Answer the call (see page 18).
(Example: Main monitor station)
PAGE
ALL STATIONS
SUB MONITOR STATION 1
SUB MONITOR STATION 2
SUB MONITOR STATION 3
SUB MONITOR STATION 4
SW251BX_OI.indb 32 9/17/2014 11:05:14 AM