4. Basic operations
12
2 Select “Unplayed images” (for new images) or
“Played images” (for images that have been
played) → .
R The most recent image set of the selected type
is displayed.
3 Browse the image sets and images.
R The following operations are available.
4 When finished, press MN.
4.7 Using electric locks
When a commercially available electric lock is
connected to the main monitor, you can unlock a door
using the main monitor, extension monitor, or sub
monitor.
R For detailed information about connections, see the
operating instructions included with the electric lock
and the Installation Guide of this product.
4.7.1 Configuring electric locks
1
Press MN.
2 Select “Connected devices” → .
3 Select “Electric lock” → .
4 Select the doorphone (“Doorphone 1” or
“Doorphone 2”) that you want to assign the
electric lock to → .
5 Select the unlocking time → .
6 When finished, press MN.
4.7.2 Unlocking electric locks
Main monitor/extension monitor:
1. Press while talking or monitoring.
Sub monitor:
1. Press MN while talking or monitoring.
R When the door is opened, is displayed.
Plays back all images in an image
set continuously
Browses image sets, from older
ones to newer ones
Browses image sets, from newer
ones to older ones
Displays the options menu
Returns to the previous screen
Pauses continuous playback
Plays the previous image in an
image set when continuous play is
paused
Plays the next image in an image
set when continuous play is
paused
SW274_IIQG.book Page 12 Friday, September 15, 2017 6:34 PM
To Next Page
Loading...
