14
Important:
Do not connect the power cable.
(Damage may occur.)
3 Mount the main monitor/extension monitor to
the mounting bracket.
3-1 Line up the tab on the bottom of the
bracket with the groove on the main monitor/
extension monitor.
3-2 Line up the tab on the top of the bracket
with the groove on the main monitor/extension
monitor, and push the main monitor/extension
monitor down until it is secure.
Notes about electrical wiring (for VL-SV72/
VL-MV72 models)
Make sure not to pinch
the wires (as shown to
the right) on the mounting
bracket when installing.
R Do not forcibly attach
to the mounting
bracket.
prj_6905-en_gb.book Page 14 Monday, April 24, 2017 6:10 PM
To Next Page
Loading...
