Panasonic VL-SV72 - Error Messages - Extension Monitor

Display Cause & Solution Page
“Cannot be used.” R The wiring between the main monitor and extension monitor is not
connected.
→
Check the wiring connections.
R The registration number used for the extension monitor is different on
the main monitor and extension monitor.
→ Use the same registration number on the main monitor and
extension monitor.
R 2 extension monitors are using the same registration number.
→ Cancel 1 of the extension monitors so that it becomes a main
monitor again and then re-register it with a different registration
number.
R Power is not connected to the extension monitor.
→ Connect power to the extension monitor.
24
24
“Not registered.” R The extension monitor has not been registered on the main monitor.
24
11.3 Error messages - extension monitor
Error messages can be viewed by pressing M N.
Display Cause & Solution Page
“Cannot connect to
the main monitor.
Please check the
connection or the
registration of
the main monitor.”
R The wiring between the main monitor and extension monitor is not
connected.
→
Check the wiring connections.
R The extension monitor has not been registered on the main monitor.
→ Register the extension monitor on the main monitor.
R The registration number used for the extension monitor is different on
the main monitor and extension monitor.
→ Use the same registration number on the main monitor and
extension monitor.
24
28
11. Troubleshooting