15.2 Replacement Parts List
Note:
1.
RTL (Retention Time Limited)
The “RTL” marking indicates that its Retention Time is
Limited.
When production is discontinued, this item will
continue to be available only for a specific period of
time. This period of time depends on the type of item,
and the local laws governing parts and product
retention. At the end of this period, the item will no
longer be available.
2.
Important safety notice
Components identified by the
mark indicates
special characteristics important for safety. When
replacing any of these components, only use specified
manufacture's parts.
3.
The S mark means the part is one of some identical
parts. For that reason, it may be different from the
installed part.
4.
ISO code (Example : ABS-HB) of the remarks column
shows quality of the material and a flame resisting
grade about plastics.
5.
RESISTORS & CAPACITORS
Unless otherwise specified;
All resistors are in ohms (Ω), k=1000Ω, M=1000kΩ
All capacitors are in MICRO FARADS (µF), p=µ(µF)
15.2.1 Main Monitor Station
15.2.1.1 Cabinet and Electrical Parts
(*1) When replacing LCD, make adjustments in "WHITE
BALANCE". (Refer to [11.1.2.2 White Balance
Adjustment]).
Safety Ref. No. Part No. Part Name & Description Remarks
1 PNYMAMV74BXS CABINET BODY ASS'Y
(-Silver)
1 PNYMAMV74BXW CABINET BODY ASS'Y
(-White)
2 PNBX1456Z1 VOLUME BUTTON (-Silver) S
2 PNBX1456Z2 VOLUME BUTTON (-White) S
Safety Ref. No. Part No. Part Name & Description Remarks
3 L0AA02A00129 SPEAKER
4 PNHS1913Z SHEET for SPEAKER
5 PNHR2565Z PCB HOLDER
6 PNMH1512Z LCD SHIELD
7 L5EDDYY00882 LCD (*1)
8 PNZEAMV74BX LCD HOLDER ASS'Y
9 PNMG1012Z MIC COVER
10 PNKF1507Z1 CABINET COVER S
11 PNGTA741Z NAME PLATE (for BX)
11 PNGTA745Z NAME PLATE (for CX)
11 PNGTA746Z NAME PLATE (for AZ)
11 PNGTA743Z NAME PLATE (for ML)
11 PNGTA744Z NAME PLATE (for SX)
11 PNGTA742Z NAME PLATE (for VN/VNP)
12 PNKV1415Z1 POWER CORD COVER S
13 PNJA1206Z POWER CORD (for BX)
13 PNJA1207Z POWER CORD (for CX)
13 PNJA1208Z POWER CORD (for AZ)
13 PNJA1207Z POWER CORD (for ML)
13 PNJA1209Z POWER CORD (for SX)
13 PNJA1206Z POWER CORD (for VN/VNP)
14 PNJS062026Z LEAD WIRE
A XTN3+10GFJ SMALL SCREW
B XTB26+10GFJ SMALL SCREW
C XTW2+R6PFJ TAPPING SCREW
15.2.1.2 Main P.C. Board Parts
(*2) When replacing IC405, IC402 or X401, make adjustments.
(Refer to [11.1.1.2 When replacing BBIC and X'tal])
Safety Ref. No. Part No. Part Name & Description Remarks
PCB1 PNWPAMV74BX MAIN BOARD ASS'Y (RTL)
(ICs & PHOTO ELECTRIC
TRANSDUCER)
IC100 MN103SW55 IC
IC101 C0EBY0000665 IC
IC160 C0JBAS000390 IC
IC230 C0DBAYY00623 IC
IC270 C0ABBA000159 IC
IC300 C3ABQY000101 IC
IC350 C3FBQY000103 IC (FLASH MEMORY)
IC390 C1ZBZ0005339 IC
IC401 C3EBKY000028 IC
IC402 PNWIBMV74BX IC (FLASH MEMORY)(*2)
IC404 C3BBHY000070 IC
IC405 C1CB00004102 IC (BBIC)(*2)
IC480 C0BBBA000024 IC
IC500 C0ABBB000179 IC
IC582 C0JBAR000282 IC
IC642 C0JBAS000342 IC
IC670 C1AB00002793 IC
IC671 C0DBGYY02061 IC
IC700 C0BBBA000024 IC
IC701 C0JBAZ003248 IC
- 84 -