Panasonic VL-SW250BX - Preparation; Setting Date and Time

Preparation
17
Setting the date and time
This unit has a recording function. The date and time will not be recorded when recording unless they are set.
You can set the date and time using the main monitor station.
{MENU}
{VOICE CHANGER}
{OFF}
{PAGE}{VOLUME}
1 Press {MENU}, then select “TIME AND DATE SETTINGS” by
pressing {VOLUME} (▼) or {PAGE} (▲).
FUNCTION SETTINGS
TIME AND DATE SETTINGS
RING TONE SETTINGS
ANSWERING SETTINGS
RECORDING/PLAY SETTINGS
2 Press {MENU} (OK), then set the current date and time.
{VOICE CHANGER} (NEXT
▲
):
Select the location for day/month/year/hour/minute.
{VOLUME} (-) or {PAGE} (+):
Select numbers.
LYou can scroll numbers quickly by pressing and holding
{VOLUME} (-) or {PAGE} (+).
(Example)
TIME AND DATE
11 / NOV / 2010 23 : 45
3 Press {MENU} (OK) after fi nishing the setting.
LThe screen in step 1 is displayed.
4 To end the operation, press {OFF}.
Note:
LTime may shift about 60 seconds per month.
01VL-SW250BX.indd1701VL-SW250BX.indd17 2010/08/319:19:292010/08/319:19:29