32
Menus
For installer
Menu Default Setting Setting Options / Display
5.5
DHW capacity
To select tank heating capacity
to variable or standard. Variable
capacity heat up tank with
fast mode and keep the tank
temperature with effi cient mode.
While standard capacity heat up
tank with rated heating capacity.
Variable
5.6
Buffer tank connection
To connect tank to the system
and if selected YES, to set
T temperature.
No
Yes
5 °C
Set
T for Buffer
Tank
Buffer tank
T for Buffer tank
Range: (0
°
C~10
°
C)
Steps: ±1
°
C
Select Confirm
10:34am,Mon
5
°
C
5.7
Base pan heater
To select whether or not
optional base pan heater is
connected.
* Type A - The base pan heater
activates only during
deice operation.
* Type B -The base pan heater
activates when outdoor
ambient temperature is
5 °C or lower.
No
Yes
A
Set base pan heater
type*.
5.8
Alternative outdoor sensor
To select an alternative outdoor
sensor.
No
5.9
Bivalent connection
To select to enable or disable
bivalent connection.
No
Yes
To select either auto control
pattern or SG ready input
control pattern or smart control
pattern.
- This selection only display
to select when optional pcb
connection set to Yes.
Auto
Smart
SG ready
Auto
To Next Page
Loading...
