Panasonic WJ-RT416 - Start the Rt4 Client; Operation Window; Image Display Area; Area Selection Buttons

7
Start the RT4Client
Step 1
Select "RT4Client" from the "Start" menu ("Start" - "All Programs" - "Panasonic" - "RT4 Monitoring Software" -
"RT4Client") or double-click the shortcut icon of the RT4Client on the desktop.
→ The monitoring software will start and the operation window will be displayed.
Image display area
Live images from the cameras and recorded images on
the recorder will be displayed in this area. The area
number is assigned as shown in the illustration below.
The selected area will be displayed with a yellow frame.
Area selection buttons
The clicked area will be displayed on a single screen.
(☞ page 16)
Multi-screen selection buttons
Click the desired multi-screen selection button. The
selected multi-screen will be displayed in the image dis-
play area.
Status display area
The status icons will be displayed to indicate the status-
es of each area. Refer to page 16 for further information
about the status icons.
Operation window
When starting the monitoring software, the operation window will be displayed.
Time and date display
area
Multi-screen selection
buttons
Image display area
Recorder control buttons System control buttons
Area selection buttons
Recorder information
display area
Status display area
Error/alarm display area
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16